In this guide we will go through the most common and useful commands for practicing Counter-Strike: Global Offensive. You can also just skip to the end of the tutorial, where you can download or copy the config and apply it to your local server. The most common thing people request is the commands for grenade trajectory, showimpacts and bots. This config have it all plus additional commands. All you have to do is execute the script and start practicing! Use it to practice flashes, smoke throws, nades, molotovs, positions, angles, search for boosts, spray control etc. We have also included some useful binds.

Apr 17, 2018  Use Grenades Wisely! Most beginners in the game entirely ignore any sorts of CS:GO grenades. Then, they start throwing smoke, flashes, and Molotovs in huge amounts without any understanding of what they are doing. With experience, players decrease the quantity of grenades in use and become more careful in throwing them.

If there is something in the config you don’t want, you can just erase it.

We made a similar guide before, only difference is that the old was just a grenade practice config.

First, we will start off by explaining, what the different console commands in the config does.

Server config

• sv_cheats 1
  Enables “cheats”.
• mp_limitteams 0
  No team limit (e.g. you can have 10 people/bots on CT and 1 guy on T).
• mp_autoteambalance 0
  Turns auto team balance off.
• mp_roundtime 60
  Maximum roundtime set to 60 minutes.
• mp_roundtime_defuse 60
  Same…
• mp_maxmoney 60000
  Enables your maximum money to be 60.000 instead of 16.000.
• mp_startmoney 60000
  You will start with 60.000 money.
• mp_freezetime 0
  No freezetime in the beginning of each round.
• mp_buytime 9999
  Almost unlimited buytime.
• mp_buy_anywhere 1
  You can open the buy menu and buy from anywhere on the map.
• sv_infinite_ammo 1
  Gives you infinite ammo and no reload. When practicing recoil patterns, you might want to set this to sv_infinite_ammo 2. This way you will have to reload but sitll have infinite ammo.
• ammo_grenade_limit_total 5
  You can now have all 5 grenade types.
• bot_kick
  Kicks all the bots. If you want to add bots, check the bot commands below.
• mp_warmup_end
  End warmup.
• mp_restartgame 1
  After the config is loaded, the server will restart the game after 1 second.

Practice commands

• sv_grenade_trajectory 1
  Show a trajectory when you throw grenades. Especially useful when practicing nades.
• sv_grenade_trajectory_time 10
  Expands the time where you can see the trajectory to 10 seconds.
• sv_showimpacts 1
  Show bullet impacts, especially useful when practicing spread control and recoil patterns.
• sv_showimpacts_time 10
  Expands the time where you can see the impacts to 10 seconds.

Useful binds

• bind “KEY” “noclip”
  Toggle fly mode (noclip) on/off.
• bind “KEY” “give weapon_hegrenade;give weapon_flashbang;give weapon_smokegrenade;give weapon_incgrenade;give weapon_molotov;give weapon_decoy”
  Gives you all the grenades available.
• bind “KEY” “cast_ray”
  Casts a ray/straight line to test collision detection.

Other useful console commands (not in final config)

• god
  Toggle god mode on/off.
• cl_showpos 1
  Show current postion in top right corner of the screen.

Bot console commands (not in final config)

• bot_add_t
  Add a bot to T team.
• bot_add_ct
  Add a bot to CT team.
• bot_kick
  Kicks all the bots from the game.
• bot_stop 1
  Stops the bots, they will stand still and do nothing.
• bot_mimic 1
  Bots will mimic your movements and actions, bot_mimic 0 to turn off again.

Download full config

How to install the config

• Download the config, file name: practicecfg.zip.
• Unzip/extract the config file, you should have a file called practicecfg.cfg.
  You will need a program to unzip, we recommend WinRar or 7Zip.
• Remember to change KEY in the file to the key you wish to assign each bind to.
• Move the cfg file to your CS:GO cfg folder.
  Normally located in:
  C:SteamsteamappscommonCounter-Strike Global Offensivecsgocfg
• When you have started a local game server, open the console and type:
  exec practicecfg
• The game will restart and all the settings are now enabled.

You can also copy the full config below and put it in whatever cfg you like.

Full config to copy/paste

Copy the below code to your config.cfg, autoexec.cfg or userconfig.cfg.

// Server config
sv_cheats 1
mp_limitteams 0
mp_autoteambalance 0
mp_roundtime 60
mp_roundtime_defuse 60
mp_maxmoney 60000
mp_startmoney 60000
mp_freezetime 0
mp_buytime 9999
mp_buy_anywhere 1
sv_infinite_ammo 1
ammo_grenade_limit_total 5
bot_kick
mp_warmup_end

// Practice
sv_grenade_trajectory 1
sv_grenade_trajectory_time 10
sv_showimpacts 1
sv_showimpacts_time 10

mp_restartgame 1

// Binds
bind “KEY” “noclip”
bind “KEY” “give weapon_hegrenade;give weapon_flashbang;give weapon_smokegrenade;give weapon_incgrenade;give weapon_molotov;give weapon_decoy”
bind “KEY” “cast_ray”

echo “”
echo “”
echo “”
echo “########## TOBYS PRACTICE CONFIG LOADED ##########”
echo “”
echo “”
echo “”

Did we forget any commands or do you have something to add? Then leave a comment below.

We have also made a post with all CS:GO console commands.

Important Notice: Do not be afraid to delete such files: Mac OS X is a unique system able to restore any preferences and offers to customize them. More than just your registry Mac cleaner. We have already mentioned that under the registry cleaner, we mean a tool that cleans the corrupted and unnecessary files (login details, logs, and cache). Eliminating it is another measure you should take to free up disk space. As Mac doesn’t have built-in ‘registry’ cleaner, MacCleanerPro is a perfect tool to perform the task. So if you’re looking for the best Mac OS X cleaner, you can look no more – MacCleanerPro is the smartest way to keep your laptop tidy and fast! Top 5 Cleaning Software for macOS 10.13 High Sierra. By Henry Lee, 2017-11-19. Mac computers need regular cleaning like other PCs. Cleaning Mac manually is a cumbersome and almost impossible task for beginners, and to improve the performance and speed of your Mac quickly and practically, correct software is required. Thus a Mac registry cleaner is very much important when it comes to keeping your computer clean and fast. There are some cleaners available in the market which are really useful and work great. But you need to know the best ones in order to get the best result. Here are the top 5 registry cleaner for your Mac OS X. Mac osx high sierra registry cleaner maintenance tool.

What are the most useful CS:GO console commands? Like with many of Valve’s other games, Counter-Strike: Global Offensive can exploit the power of the Source engine console to give you more options and better settings. It’s just as important for improving at the game as knowing where to aim guns and grenades – plus, it can even make practising that much easier and more efficient. Being a Steam game, CS:GO also has launch options that can be configured to customise elements before you’re even loaded in.

All Counter-Strike: Global Offensive veterans will tell you that matches of skilled players can be won and lost on the smallest of margins. A smoke grenade lobbed an inch to the left of the optimum location can reveal your push to the enemy team, for instance. Ensure you have all the knowledge you need to win with the best CS:GO console commands.

Below we’ll break down all the best console commands and launch options, and even recommend what you should change in your config files to give you the biggest advantage possible. If you’re a new player, you might want to check out our CS:GO tips before heading into the console, to help you get a leg up in Valve’s deceptively complex FPS.

What are the best CS:GO launch options?

To input launch options, head over to Steam, right click on CSGO and go to properties. Hit ‘Set Launch Options…’ and a box will pop up. The syntax for commands put into this box is -[command] and then a space before the next one or any additional values that might be required. We’ll get into specifics with each command as we go.

Load console on game start
-console
This will enable the console as soon as you get into the game. It’s useful for making sure your config files have loaded properly, but unlike with Counter-Strike: Source, it isn’t required to make the console show up when you press its hotkey (more on this later).

Disable intro videos
-novid
Turns off the Valve intros, saving you precious seconds every time you boot into the game

High CPU priority
-high
Gives the game high priority in your CPU, meaning background tasks won’t slow it down as much. Useful for keeping web browsers running on a second monitor while playing. Messing with CPU priority isn’t a risk free operation, but is unlikely to damage anything permanently. Try disabling this command if you’re getting blue screens.

Govern CPU core usage
-threads [number]
Tells the game how many CPU cores it has access to. Recommended to set this to however many cores your computer has (probably 4). Exactly whether this will improve or decrease your performance is specific to your computer, so enable or disable this command as necessary.

Set offline server tickrate
-tickrate [number]
The tickrate is the number of times per second a server updates the status of everything on it. Most matchmaking servers run at a tickrate of 64, which is the default for local games you host offline. If you want to change to the competitive server tickrate of 128, change to that with this command.

Graphics options
-fullscreen
Loads the game in fullscreen

-windowed
Loads the game in a window. These commands set the width, height, and position:

-w [width] -h [height] -x [horizontal position] -y [vertical position]

So if you wish to have a window that fills a second 1080p monitor, you would use this string of commands: -h 1920 -w 1080 -x 1921 -y 0.

-noborder
Removes the border around a window.

Change client language
-language [language]
This forces the client into a certain language. Useful if you want it in English but have a non-English Steam client, or vice versa.

What are the best CS:GO console commands?

Now we’ll move onto console commands. These come in a couple of flavours – ones that you want running every time the game starts, and ones that are useful to just pop into the console when you want a specific effect. All of them are best implemented using config files to keep them in order and let you change settings on the fly.

What is a CSGO config file?

Config files are located in [your Steam directory]SteamAppscommonCounter-Strike Global Offensivecsgocfg. If you haven’t already set Windows up to open these files with Notepad, try to open config.cfg and tell it to do so (or an equivalent simple text editor that won’t give weird formatting).

In here are all your in-game options stored as console commands that run every time you load the game. You can edit them from here if you like, but it also lets you change parts of the game not in the options menu, or copy-paste settings from outside the game, as we’re about to do. However, it’s much safer to use an autoexec.cfg file to do this, as it means you know all your changed settings are in one place and can easily be transferred between machines.

The other thing config files are good for is as lists of commands that can be executed with a single line from inside the game. This is very useful for setting up configurations for different sorts of match or specifically for practising against bots with server-side cheats on. The autoexec config file mentioned above automatically runs whenever you start the game.

So, what should be in my CSGO autoexec?

In your autoexec you want the settings that are global for any time you’re playing CSGO. This means your keybindings, graphics settings, and so on. We’ll divide this into groups of commands to explain. To create one, simply make a new notepad document in the cfg folder, go to Save As, change file type to All Files and name it autoexec.cfg. As with all Source engine games, console commands in a config file require quotes around values.

Graphics settings

In general you want the lowest settings possible when playing CSGO competitively because it maximises your FPS and removes flashy effects that get in the way of seeing enemy heads to click on. You can set all those in the options menu. Here’s some extra vital ones.

View brightness
mat_monitorgamma “[value]”
This alters how bright the game world is. Most autoexecs I’ve seen have it set to between 1.6 and 2.1. Useful for picking enemies out of darker corners, like dust_2 tunnels.

Multi-core rendering
mat_queue_mode “-1”
Tells your computer how to deal with CSGO. Don’t change this from “-1” unless you know what you’re doing more than we do.

Maximum FPS lock
fps_max [value]
Sets the in-game maximum FPS. 0 will remove the lock, which some players prefer to sit at 145 for consistency. Naturally, you want this as high as possible, and over the server’s tickrate at the very least (again that’s 64 for matchmaking, 128 for custom competitive). fps_max_menu does the same for, surprisingly, menus.

Disable dynamic lighting
r_dynamic “0”
Turns off dynamic lighting, which some players find distracting.

Disable particles
r_drawparticles “0”
Turns off engine particles.

Disable tracer fire
r_drawtracers_firstperson “0”
Removes the light tracers from your weapons when firing. AKA the worst part of CS:GO. If someone had told us about this command when the game launched we’d probably be on NiP by now.

Save graphics options
mat_savechanges
This saves your graphics options so they’ll be the same the next time you start up the game. Important.

HUD settings

This section covers some vital components – the radar, the rest of the HUD, and how to reduce weapon bob in CSGO.

The Radar

Adding this set of commands to your autoexec file will make the whole map appear on the radar the entire time, making it easier to spot enemies.

cl_radar_always_centered “0”
cl_radar_scale “0.3”
cl_hud_radar_scale “1.15”
cl_radar_icon_scale_min “1”
cl_radar_rotate “1”

This will also make the radar a bit bigger, make icons appear larger on it and decenter it so it no longer moves with you. This means less space is wasted if you’re close to the edge of the map.

The Crosshair

Perhaps the most important part of CS:GO’s HUD is the crosshair. You’re going to be staring at it for about a billion hours and it’s vital you can always pick it out from the background. There are tons of options in-game for setting up what it looks like, plus loads more console modifications that can be made. Rather than listing all the possible options here, we recommend using a crosshair customiser that’ll spit out the correct commands you can copy and paste in.

As for the rest of the HUD, you can customise it with the following commands.

HUD Scale
hud_scaling “[value]”
Changes the size of the HUD as a whole. 0.8 seems to be the accepted best standard.

Toggle target names
hud_showtargetid “[value]”
Controls whether names show up when hovering over players.

Adjust HUD Alpha
cl_hud_background_alpha “[value]”
Changes the opacity of the HUD background. 0.1 is standard.

Position bomb display
cl_hud_bomb_under_radar “[value]”
Changes the position of the bomb indicator for when you have the bomb. 1 is under the radar, 0 is in inventory.

Adjust HUD colour
cl_hud_color “[value]”
Corresponds to the menu in-game that selects your HUD’s colour. 0 through 10.

Toggle avatars on mini-scoreboard
cl_hud_playercount_showcount “0”
Whether to simply show the number of players or all of their avatars as well on the top of screen scoreboard.

Move View Model

This set of commands will move the model of your weapon a little out of your way and disable the bob that occurs while running.

cl_righthand “1”
viewmodel_offset_x “0”
viewmodel_offset_y “-2”
viewmodel_offset_z “-2”
viewmodel_fov “54”
cl_bobamt_lat “0.1”
cl_bobamt_vert “0.1”
cl_bobcycle “0.1”
cl_viewmodel_shift_left_amt “0.5”
cl_viewmodel_shift_right_amt “0.5”

You can change the first command here to “0” if you prefer a left handed weapon. This set is super useful for maximising your viewing area and removing distracting animation. Both are vital for edging out those tiny advantages that make the difference between an AK bullet to the skull and victory in the round.

Performance Improvements

The holy grail of config edits, these are what you’re here for. You won’t notice a massive boost from enabling this set of commands, but it will smooth things out, particularly on 128 tick servers.

rate “128000”
cl_cmdrate “128”
cl_updaterate “128”
cl_interp “0”
cl_interp_ratio “1”
cl_lagcompensation “1”

All six of these are about making sure your computer is communicating with the server as efficiently and often as possible. It minimises the number of times your computer will think something has happened and the server corrects it a moment later, usually leading to that sweet headshot being flip-turned on you in the worst way possible.

Sound

Sound is ludicrously important if you don’t want to get sneaked up on in Counter-Strike. Here’s what the console lets you do in that area.

Adjust main volume
volume “[value]”
Scales from 0 to 1 with a couple of decimal places.

Toggle voice chat
voice_enable “[value]”
0 for off, 1 for on. Some bind a button to toggle between the two for when they want quick access to not hearing their teammates any more:

bind “[key]” “toggle voice_enable 1 0”

Voice receive volume
voice_scale “[value]”
Adjusts the volume at which you receive voice communication from other players. Works on the same scale as normal volume.

Adjust speaker configuration
windows_speaker_config “[value]”
Corresponds to the menu in-game that lets you select between headphones, 5.1 surround, and so on. -1 will auto-pick, while 1 is headset, 3 is four speakers, 4 is two speakers, and 5 is surround.

Adjust music volume
snd_musicvolume “[value]”
Changes the music volume. Many set this to 0 to avoid distractions.

Sound delay
snd_mixahead “[value]”
Determines how much sound is buffered by the engine. The default is 0.1, while many players prefer 0.05 or lower. This can come with serious performance issues but it’s worth putting it as low as possible to get more instant reactions.

Adjust volume of distant sound
snd_headphone_pan_exponent “[value]”
Changes how loud distant sounds are. Higher means more distant map awareness, but makes it more difficult to tell when enemies are closer. Scales 0-100.

Adjust centered sound radius
snd_headphone_pan_radial_weight “[value]”
Changes how close to the crosshair a sound source has to be before it is centered in your headphones. Scales 1-100.

Bindings

You can also use the autoexec file to set your bindings. Beyond the obvious shooting and jumping, it’s good for setting up buttons that’ll quickly buy the most common items required – the various sorts of grenade, the most common guns and armour/defusers. Here’s how the command works:

bind “[key]” “[action]”

Rather than run you through all the different possible permutations of this, there’s a number of helpful tools that will customise this section of your autoexec for you. This one even has a nice GUI where you click buttons to select which key and gun you want to match. A majority of better players use the numpad for these bindings.

Aliasing

Aliasing is where you define new commands for the console by combining others. This is most useful in combination with bindings to let one keypress execute a large number of console commands.

alias [new command] “[command]; [command]; [command]”

There’s a lot of complicated stuff you can do with aliasing, from binding buttons to have contextual actions to making the scoreboard show up alongside the net graph. Experiment with it and look around the net for other people’s autoexecs, or see our list of links at the bottom, to see what you can get up to.

Enabling Practice Mode

One of the most useful tools the console gives you access to is a custom-made practice mode. In this, you can track where bullets are landing, how grenades are being thrown, play on maps that don’t end, and position bots to your liking. You even have infinite ammo and can buy guns map-wide.

Obviously, this isn’t something you want every single time you load up the game, so we’re going to use the exec command. It lets you execute config files from inside the game, like how autoexec does this automatically. We’ll set up a practice cfg file and then use this syntax to load it in the game:

exec [filename]

You can set all this up yourself, but naturally legions of folks have done it before and created optimised versions with custom binds and interesting information readily available. League organiser FACEIT has a video tutorial for its own.

There’s a download in the description. It’s been updated since that video was made with some of the suggestions from this Reddit thread, which is also worth looking at if you want to modify the config further. Just open it in Notepad like you would any other config file and change as you like. Here’s some useful commands:

No team restrictions
mp_limitteams “0”
Turns off balancing of teams, letting as many players or bots be on each side as you like.

No autobalance
mp_autoteambalance “0”
Turns off auto-balancing, a must with the above.

Hour-long rounds
mp_roundtime “60”
mp_roundtime_defuse “60”
Sets round times to 60 minutes so you can mess about for as long as you like.

Infinite money
mp_maxmoney “60000”
mp_startmoney “60000”
While not technically infinite, this sets your money to enough to buy as much as you like for testing purposes.

No freeze on round start
mp_freezetime “0”
Removes the no-movement time at the start of a round.

Buy anywhere, anytime
mp_buytime “9999”
mp_buy_anywhere “1”
Allows you to buy anywhere on the map at any point in the round.

Infinite ammo
sv_infinite_ammo “1”
Gives guns infinite ammo.

Five grenade slots
ammo_grenade_limit_total “5”
Allows you to carry five grenades in total.

End warmup on start
mp_warmup_end
Takes the game out of warm up.

Restart the server
mp_restartgame “1”
Useful either as an end-of-autoexec clean slate or a command to restart whenever you need to.

Show grenade trajectory
sv_grenade_trajectory “1”
sv_grenade_trajectory_time “10”
Enable to show where grenades have travelled after release, good for testing smoke placements.

Show bullet impacts
sv_showimpacts “1”
sv_showimpacts_time “10”
Shows where bullets landed as well as how much penetration they achieved.

Kick bots
bot_kick
Kicks a bot.

Add bots
bot_add_t
bot_add_ct
Useful for target practice.

Stop bots
bot_stop “1”
Prevents bots from moving.

Make bots mimic player
bot_mimic “1”
Makes bots mimic the movements of the player, allowing them to be positioned when combined with bot_stop.

Misc Additional Commands

Here’s some stuff that doesn’t fit into other categories, but might be useful anyway. It includes some of the commands in the practice files linked above that might be useful elsewhere, too. You can put them in autoexec as you like, or just type them in directly when you want them. Remember that if you’re typing directly into the console then quotes aren’t needed around values.

Enable console
con_enable “1”
Allows access to the console. This can be switched on from in-game, but bung this in your autoexec if you never want to have to worry about it.

Enable cheats
sv_cheats “1”
Enables cheats on local servers. Obviously, this doesn’t work while playing on a server you don’t have admin access to, which will be most of them.

Enable developer mode
developer “[value]”
Changes how much output is displayed in the console. 0 is normal, while 1 will give you a little more info. Enabling it is also required for some commands.

Print damage on screen

con_filter_enable “2”
con_filter_text “Damage”
con_filter_text_out “Player:”

This set of commands will print your damage dealt and received to the top-left corner of the screen whenever you die, rather than you having to check the console to find out.

Change Steam overlay position
ui_steam_overlay_notification_position “[bottom/top][left/right]”
Allows you to customise where Steam overlay alerts appear. Top left is my preference. Note that there’s no space between the two modifiers.

Disable help messages

cl_autohelp “0”
cl_showhelp “0”
player_nevershow_communityservermessage “1”

This set will turn off the ‘press F to inspect your gun’ style messages.

Turn off server MOTDs
cl_disablehtmlmotd “1”
This stops servers showing you their Messages of the Day, which are usually adverts and bloaty HTML.

Highest ping for matchmaking
mm_dedicated_search_maxping “[value]”
This limits which servers you will be matchmade onto based on their ping. Roughly, anything over 100 isn’t really playable, and most people prefer to play at sub-80.

Don’t download custom sounds
cl_downloadfilter “nosounds”
Stops sounds being downloaded from servers. You’ll miss out on a few MULTIKILLs but will save on disc space and connection times.

Disable weapon switch on pickup
cl_autowepswitch “0”
Means you won’t switch to any gun you pick up. You don’t want to walk over an AK while shooting somebody with a pistol and suddenly be going through a weapon change animation. Believe us.

Buy menu remains open
closeonbuy “0”
Stops the buy menu closing once you’ve purchased something, meaning you can purchase more weapons. Capitalism in action.

Auto-screenshot scoreboards
hud_takesshots “1”
This will take a screenshot of the scoreboard at the end of every match. Good for bragging and keeping track of how you do.

Preload maps
cl_forcepreload “1”
This preloads everything on a map when you first connect, rather than as you get to it. Increases load times but means less stutter mid-game. Vital.

Turn off freezecam on death
cl_disablefreezecam “1”
Disables the smash-zoom and freeze onto your killer when you die.

Save settings to config
host_writeconfig
This makes sure that all these settings are enabled and saved. Always a good idea to have this as the last command in your autoexec.

Print to console
echo “[text]”
This prints text to the console. Useful for making sure your autoexec has loaded properly, with a message along the lines of echo “PREPARED FOR DIGITAL SPORTS.”

Lastly, here’s some specific commands that don’t make sense in an exec file but might be useful every now and then.

Third-person mode
thirdperson
Moves the viewpoint to third-person. Requires sv_cheats. firstperson puts you back.

Wireframe wallhack
mat_wireframe “1”
Axia ip audio driver for mac. Allows you to see other models through the terrain in a wireframe model. Obviously this requires sv_cheats, but can be useful for seeing how bots move around a map and where people will be at certain points.

No clip
noclip
Turns on no clipping mode. Useful for exploring levels quickly. Requires sv_cheats.

God mode
god
Makes you invulnerable. May be useful in bot games or for practicing jumps that damage you if you fail. Requires sv_cheats.

Suicide
kill
Kills you for the round. May be needed if you get into a weird spot or want to reset a solo round.

Counter-Terrorists Win

That’s your lot. Here’s a couple of handy links to where much of the information for this article was found. They’re also both useful if you’d rather shortcut the process of making your own autoexec.

Autoexec generator – a tool for making an autoexec that uses a basic GUI to create it.
Budi’s CSGO Autoexec – a regularly updated autoexec that should do everything you need.